How To Make THC E Juice – An Easy Recipe

THC E Juice

THC E Juice is one of the most discrete ways to consume cannabis. Follow this easy recipe and you can make it at home to use in your vape pen. If you’ve been looking for a way to use your e-cig or regular liquid pen vaporizer to smoke weed, look no further than the guide below.

Feeling lazy? You can order THC E-Juice using WoahStork’s online cannabis marketplace.

Vaporizing cannabis is one of the most effective ways of consuming the fine plant that we’ve all come to know and love. Not only do you need less product,  but you end up with much less of the tell-tale smell that screams you’ve been smoking. Eating cannabis baked into cookies, fudge, and brownies (i.e. edibles) is also another effective delivery method, but it takes longer for the effects of the THC to kick in due to digestion. Using shatter or wax can take a complex dab rig or specialty vaporizers. However, anyone with an authentic liquid pen vaporizer or box that handles e-juice can vaporize THC e juice easily.
THC E Juice

That’s right, the same devices responsible for “blowing clouds” can now be used to smoke cannabis (or at least the cannabinoids derived from the plant).

The “E” in THC E Juice stands for “electronic” — meaning it can be vaporized using an electronic device like an e-cig or liquid vaporizer.

You can now buy THC E Juice in single dose cartridges through WoahStork. But… if you’re feeling DIY and want to save some $$$, you can make your own cannabis-infused E-Juice in the comfort of your own home. It is a relatively simple process, involving just a few tools that you may already have.

Don’t Overlook The THC Dosage

Before we get into detailed instructions on how to infuse e-juice with THC, it’s important to talk a bit about dosage. You don’t want to make your juice too strong nor too weak. THC E Juice creation starts with wax or shatter. Assuming you are getting your wax or shatter from a dispensary, there should be dosage information on the package.  If you are using another source, ask them if they know the percentage of THC the wax has in it. A good rule of thumb is that most solvent based hash-oils will land in the 60-90% THC range.

If you have a glob of wax that weighs in at one gram, and that wax is 80% THC, then the dose will measure out to 800mg of THC

Keep in mind that the recommended starting dose for something edible is only 5-10%, or 5-10mg. Dabs and THC E Juice are definitely not for beginners to cannabis consumption.

An Easy Recipe For THC E Juice

Just in case you’re a total newbie to making e-juice, let’s cover making a basic e-juice at home from scratch before we get to the infusing process. You’ll need some empty glass dropper bottles or plastic unicorn tip bottles with childproof caps. You’ll probably want some latex gloves to protect your hands. You will also need blunt tip syringes for accurate measuring, though you can use the counting drops method if you prefer.

You will need propylene glycol (PG) and vegetable glycerin (VG). Both are FDA approved and already used in many foods we all eat every day. Your base – this is the liquid before you add flavoring or nicotine – will be anywhere from 50/50 to 80/20 VG to PG. As long as you stay in this range, you should be safe.

Once the base is created, it’s just a matter of adding flavors or infusing herbs into the base until the desired taste and concentration is reached. There are many methods to steeping, but the easiest method is to cap your home-made e-juice bottles and let them sit in a dark, cool place for a few days.

THC E-Juice Infusion

Now that you understand the basics of how to make your own e-juice, let’s discuss how to infuse THC into a base using wax or shatter. If you need to know how to make THC E juice from buds, you are looking at a longer and much more involved process. Basically, you’ll need to extract the THC from raw plant material first. You can check out this post for all the different ways to extract THC from raw cannabis buds. The instructions below will assume you’ve already either purchased concentrates or made some yourself.

Hint: you can make rosin from home by just placing buds in wax paper and applying heat and pressure (even a hair straightener will do!). 

Ingredients:

1 gram of hash oil (wax, shatter, or rosin is best) [available on WoahStork]

Bottle of your preferred e-juice mix of PG and VG

Instructions:

  1. In a ceramic bowl, use a spoon to flatten your gram of wax, shatter, or other hash oil. Cover it with parchment or wax paper to keep it from sticking to the spoon.
  2. Melt your wax. There are a couple of methods to accomplish this. One is to place the bowl with the flattened material in a bowl of warm water for a few minutes. Another method is to pop it in the microwave and use the “defrost” setting for a minute at time. Get the mixture runny.
  3. Begin adding drops of your VG/PG mix (start with about 30) and stir for about a minute. The wax and the VG/PG mix should be completely incorporated.
  4. Let the mixture cool completely. It should be about the consistency of honey. If it is too thick, warm it again slowly and add more drops of your VG/PG mix until it is the correct consistency.
  5. Place your THC-infused e-juice into your vaporizer and enjoy!

Now you know how to make your own THC  E Juice. Like most E-Juices, there will be some smell of cannabis, but not nearly as much as if you were smoking a joint or a bowl of bud. Whether starting from scratch with finely ground buds or with shatter or wax,  you can now vape your cannabis from any vape pen or mod. Keep in mind you could also use this method to create CBD E-Juice by using either CBD concentrates or making concentrates from strains high in CBD. Happy vaping!

About Michael Jacobs 1 Article
Michael is a marketing and creative content specialist at GotVape.com with primary focus on customer satisfaction. Technology and fitness combined healthy lifestyle obsession are his main talking points.

17 Comments

  1. You should decarboxylize your concentrate to be on the safe side. I have better results this way, even though I know the vape pen should be hot enough to do it.

        • I believe this article is intended for patients and recreational consumers who have access to concentrates prepared by professionals or licensed companies. A method of extraction was given as an example in the article for consumers who may not have access to concentrates (making rosin).
          It is not advised, nor legal for individuals to make extracts from solvents.

  2. I bought a pre-filled thc vape cartridge and it’s way too strong for a noob like me. One hit and I was bouncing off the walls
    I would like to make a weak mixture with a gram of crumble I bought
    I’m a long time DIY vaperm could I just use more base to make it less potent?
    I also prefer 80/20 pg/vg, is that ok for THC base?
    Also I would like to add my all day flavor, is that ok also?
    Thanks!

    • The less concentrate, the better actually! The PG/VG mixture will blend better with less plant material. I tend to enjoy some of the vape cartridges that are 1:1. CBD has been shown to curb a lot of the anxiety and “intensity” you speak of.

    • Hello Sir… I noticed your comment about a thc vape cartridge that you used and was too strong. I’d like to know the details of that cartridg please… name , brand, strength, strain. Thanks:)

  3. I have tried several times to make e juice from Rosin and the effects suck. The pen vaporizer I use does not get hot enough to turn the THCa to THC, thus giving you a really weird body high with none of the psycadelic effects you want. PG and PeG suck too. Horrible taste and the recent studies claim that they produce too much Formaldehyde when vaporized. Better off using MCT oil (derived from fractionated coconut oil). MCT and Vegetable Glycerin are your safest bet but VG will seperate from the THC. I have decided to decarb my product prior to adding my MCT cutting agent. I just use terpenes to the mix afterwards to create the entourage effect, potency and flavor.

  4. Hello is there any way i could get some suggestions on heating the wax/shatter up? could i use a hair dryer? im not quite sure what the article is desrcibing.

Leave a Reply

Your email address will not be published.


*